Star San 473 Ml – No Rinse Sanitiser – Five Star

Starsan No Rinse Sanitiser – Five Star

A high foaming, final acid anionic rinse for use in the beverage and food industries.
Leaves tanks and equipment spotless and avoids mineral build-up
Not affected by organic soils
Only 60 sec. contact time needed!
Do not use on soft metals nor in CIP systems
Dosage: 15 – 25 ml / 10 litres of water
User manual in English & Italian

Directions for use at Home / Work

Use as a final rinse. Prior to application; remove gross food particles nd soil by pre-flush or pre-scrape and, when necessary, pre-soak. Then thoroughly wash or flush objects with a good detergent, followed by potable water. Prepare a solution of 15 – 25 ml Star San HB™ per 10 L of water ( 1 oz/5 gal to 1 oz/3 gal). Apply on surface with a cloth, mop, sponge, spray or by immersion. Spray 15-20 cm (6-8 inches) from surface and rub with a brush, cloth or sponge (cover or remove all food products). The surface must remain wet for at least 1 minute. Rinse with water of the same temperature. Close the packaging tightly after use and store in a well-ventilated place. Always keep containers upright to prevent leakage. Keep out of reach of children.
DO NOT MIX STAR SAN HB™ with chlorinated cleaners as chlorine gas will result.
Do not use on aluminium

Item Range

Star san is available in a range of sizes 236ml, 473ml and 1 gallon